Privacy Policy
Privacy Notice
We
know that you care how information about you is used and shared, and ...More
Return Policy
You may return most new, unopened items for a full refund within 30 days of delivery. These items ...More
Terms of Use
Terms and Conditions of Use
Welcome to our online store. We are pleased to provide you with ...More
FLAT - TOP® CARBIDE RUNNERS FOR ULTRA III (Woody's)
|
|||
Parts Unlimited Snow 2010 Starting at $25.95 |
|||
- Features
- Request Information
- Send to a Friend
Ultra Series™
- For use with OEM composite ski; track studding required
- Sold in pairs
- Carbide wear pads are used throughout the entire bar for longer life
- Designed for the most aggressive trail riding
- 5/8” host runner features a full 10” of 60° turning carbide
Executive Series™ Flat - Top
- Extra-long studs make it easy to install plastic ski skins
- Track studding required
- Sold in pairs
- Designed for aggressive trail riders and racers
- 1/2” diameter host runner features a full 8” of 60° sharp edge turning carbide
- 1 1/2” carbide wear pads front and rear and full-length hardweld surfaces between all three carbide inserts ensure extended wear
Trail Blazer IV™ Flat - Top
- Extra-long studs make it easy to install plastic ski skins
- Full-length hardweld surfaces between all three carbide inserts provide extended wear
- Sold in pairs
- Track studding recommended
- Excellent high-speed cornering control
- Designed for aggressive trail riders
- Wear pads are a full 1 1/2” long
- 1/2” host runner features 6” of 60° sharp edge turning carbide
Extender Trail III™ Flat - Top
- Extra-long studs make it easy to mount plastic ski skins
- Sold in pairs
- Full-length hardweld surfaces between all three carbide inserts for total wear protection
- Woody’s most popular carbide
- 7/16” host bar carries 4” turning carbide that has a sharp 60° edge angle for performance cornering; 1 1/2” carbide wear pads help extend runner life
Top - Stock™ Hard Surface Bar
- 1/2” thick with flat-top design, extended mount studs and a rear angle cut
- Sold in pairs
- Not recommended to replace OEM carbide runners; not suitable for sleds with over 48 installed studs in track
- A hardweld runner designed for extreme service or utility applications
- 1/2” host bar with a double bead of hardweld increases the depth of the runner for controllability in grass racing or deep snow conditions